Search:     Advanced search


Discuss your PLC and automation problems for Allen Bradley, GE, Omron, Mitsubishi, Modicon, Panel Views, RS View, ABB, Adept Robots, Cognex etc. You can also submit and download sample PLC code.

If our forums and knowledge base still hasn't got your PLC operational, we recommend contacting PDF Supply and Electric for PLC repair and replacement parts.

document Ethernet: How fast is it really?
Ethernet: How fast is it really? Authored By Jeff Nowling Industrial Automation Engineering Consultant, Omron Electronics LLC With the popularity and low cost of Ethernet hardware, industrial control systems are evolving toward this platform. Users be aware; proper network design and...
13 Oct, 2010 Comments: 0
document Installing and Troubleshooting Omron LSS3 (Ladder Support Software)
PRODUCT: LSS version 3.02. WHAT IT DOES: LSS (Ladder Support Software) is a software package used for writing and documenting ladder programs for the C-series PLCs. LSS will run on any IBM PC or 100% compatible under DOS 3.20 or higher. The installation program supplied on...
01 Sep, 2003 Comments: 0
document Getting started with LSS 3.02 (Part 1)
ON-LINE: Computer can communicate with a PLC, down and up load information. Cannot save information to a disk. Can only edit a current program. OFF-LINE: Computer can NOT communicate with a PLC. Computer can save and retrieve information to an from a disk. Can also create...
01 Sep, 2003 Comments: 1
document LSS Ladder Support Software FAQ
LSS SOFTWARE FAQ LIST Questions: 1. LSS software locks up during the initialization period whenever I install the software. Why? 2. Printer is not printing my ladder program, only a series of numbers and characters. Why? 3. Cannot get my comments to print out. What am I doing wrong? 4. Cannot do...
01 Sep, 2003 Comments: 0
document Getting started with LSS 3.02 (Part 2)
CHANGE TIMER/COUNTER PRESENT VALUE (PV) 1. Press the END key. 2. Press the "N" key. 3. Data monitor screen will appear in lower quarter of CRT. 4. Press CTRL + F5 for counter. 4a. Press CTRL + F6 for timer. ...
01 Sep, 2003 Comments: 0
document How to Connect a US Robotic External Modem to an Omron PLC Hostlink
Normal 0 false false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 OMRON Remote PLC Communications Guide Using CX Programmer, Syswin or CPT software with Omron PLCs over a Modem V2.10 Written by Jay Hughes 1-1 Introduction Welcome to OMRON Electronics LLC's Remote PLC...
13 Oct, 2010 Comments: 0