Search:     Advanced search


Discuss your PLC and automation problems for Allen Bradley, GE, Omron, Mitsubishi, Modicon, Panel Views, RS View, ABB, Adept Robots, Cognex etc. You can also submit and download sample PLC code.

If our forums and knowledge base still hasn't got your PLC operational, we recommend contacting PDF Supply and Electric for PLC repair and replacement parts.

Entering a Sequential List of IP Addresses in RSLinx

Article ID: 82
Last updated: 17 Aug, 2008
Ever wanted to add a long list of sequential list of IP addresses in RSLinx? Well you can now.

1.    Start run regedit [HKEY_LOCAL_MACHINESOFTWARERockwellSoftwareRSlinxDriversAB_ETHAB_ETH-1Node
2.    Right Click on the folder then save a copy (Secret Handshake do this 2 times 1 to edit  another to BACK-UP) Close regedit
3.    Open the copy that you just made in NotePad just to see what it is going to look like.
4.    Open the Excel file attached under the Tools, Macro, Macros... edit the NEW INCREMENT 
5.    Change the IP address under the third group according to what your system is.
6.    Run the MACRO
7.    Delete the 63 address in the system RSLinx uses it is a Driver
8.    Save it as an .XLS
9.    Open in Calc (You may be able to do this in excel I could not get it to work)
10.    Save-As and select the Save as type of Text CSV the file name will need to have .reg after it. Check the filter settings and hit save
11.    A warning will come up saying that the format in the document may not be saved in a Text CSV file format. Click Yes
12.    The next window will have a area to select the Text Delimiter. Delete the “ and click OK
13.    File the .reg.csv in where you stored it at on your computer and Open it in NotePad and compare the original you should see the same format.
14.    After you are satisfied that the format is the same. Close All the other EXCEL, NOTEPAD, VB, Ect. And find the .reg.csv file.
15.    Double click on the file and a Registry Editor box will pop up asking if you want to add the info in the file to the Registry Click Yes
16.    Another box should pop up with the Info has been successfully added to the registry.
17.    Open RSLinx verify the address are where you want them.

Download the EXCEL file in the attachment BELOW.
Article ID: 82
Last updated: 17 Aug, 2008
Revision: 1
Views: 9837
Comments: 0
This article was:   Helpful | Not helpful
Prev   Next
How to use EXCEL for your Symbols and Descriptions in RS Logix...     Configuring a Allen-Bradley ControlLogix PLC