GE Fanuc

GE Fanuc

PLC Store : GE Fanuc
GE Fanuc PLCs allow total migration from the original General Electric Series Six PLC to the Series 90-30, Series 90-70 and finally to the Rx3i Rx7i Pacsystems. GE Fanuc programming software was formally known as Cimplicity but now uses the family name of Proficy Machine Edition as well as PE for the HMI. Intellution FIX32, iFix and i Historian were all converted to the GE Fanuc family of software named Proficy.

Products

Product Number Description
IC695CPK330 GE IP Rx3i PacSystems CPU with Energy Pack
IC695CPU310 300Mhz CPU with 10Meg of memory 2 SERIAL PORTS (occupies two slots on system base) IC695C IC695CP...
IC695CPU315 MOTION CONTROLLER MODULE
IC695CPU320 1Ghz CPU with 64Meg of memory 2 SERIAL PORTS (occupies two slots on system base). IC695C IC695CP...
IC695CRU320 New RX3i 1Ghz Redundancy CPU With Two Serial Ports In Stock!
IC695ECM850 PACSystems RX3i IE IEC 61850 Ethernet Communication Module
IC695EDS001 GE IP Ethernet DNP3 Slave/Outstation Module Rx3i PACSystems DNP3 Ethernet Outstation
IC695EIS001 PACSystems RX3i Ethernet Server
IC695ETM001 Ethernet module 10/100 Mbits 2 RJ45 connections one IP address IC695E IC695ET IC695ETM
IC695GCG001 RX3i GENIUS Communications Gateway
IC695HSC304 RX3i High Speed Counter, 4 channels. 8 configurable inputs and 7 configurable IC695H IC695HS...
IC695HSC308 RX3i High Speed Counter, 8 channels. 16 configurable inputs and 14 configurable ESCP outputs....
IC695LRE001 RX3i Local Expansion Module Occupies no system slots on base IC695P IC695PB IC695PBS
IC695MDL664 Smart Digital Input Module
IC695MDL765 Smart Digital Output Module
IC695NIU001 RX3i NIU with two serial ports and 20K of local logic. IC695N IC695NI IC695NIU
IC695NKT001 RX3i Ethernet NIU Kit includes NIU (IC695NIU001) and Ethernet module (IC695ETM001). IC695N...
IC695NKT002 RX3i Ethernet NIU Kit with two Ethernet modules. IC695N IC695NK IC695NKT
IC695PBM300 RX3i PROFIBUS Master Module (must be installed on RX3i PCI bus). IC695P IC695PB IC695PBM
IC695PBS301 RX3i Profibus Slave module supports V1 functionality. IC695P IC695PB IC695PBS
IC695PMM335 PACMOTION 4-AXIS SERVO MOTION CONTROLLER FOR RX3I
IC695PNC001 Rx3i Profinet Controller
IC695PNS001 GE PLC Rx3i PacSystem IC695PNS001 IC695PNS00 IC695PNS0 IC695PNS
IC695PRS015 PRESSURE TRANSDUCER MODULE
IC695PSA040 RX3I Power supply 120/240VAC and 125VDC 40 watts occupies two slots on system base. IC695P...

1-919-680-1773

Request A Quote

Enter the code you see here



MrPLC.com sells new, new surplus and remanufactured products. This website is not sanctioned or approved by any manufacturer or tradename listed. We are not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.